This automatic charger is a microprocessor-controlled, intelligent battery charging and diagnostic tester for 12V lead-acid batteries (Gel, EXIDE, AGM, Hawker, Microflies and acid) which can also handle CAN-BUS systems. After switchover, it can also be used to charge modern lithium batteries. It works with characteristic controlled charging
technology and allows for optimal charging and battery maintenance. All the connection accessories are included.
- Micro processor - multilevel I/U charging characteristic
- Charging current max. 2 A (automatic charge control) with trickle charge
- Automatic charging, battery test and diagnostic function, defect detection
- Switchable between lead, gel, AGM, EXIDE, Hawker and LITHIUM batteries
- Can handle CAN-BUS systems
- Automatic battery maintenance mode (desulphation)
- Protection against electronic short circuit and wrong polarity
- Non-sparking - no battery removal required
- 7 LEDs: (Power / Pb / Li / CHARGE / polarity-reversed / DONE / DEFECTIVE)
- Connection accessories: universal plug, fully insulated pliers, battery cable
Technical data:
- Operating voltage: 220-240 V / AC 50 Hz
- Charging current :max. 2 A (autom.)
- Voltage: 12V
- Charging voltages: 7,15 /14,3 V (U1 Phase)
- Recommended for: 1,2 - 100 Ah
- Surrounding temperature: 5 - 50° C
- Dimensions, weight: 165 x 82 x 47 mm / 608 g
CAN-BUS information
Article number 2012N: Garage Trolley 320kg
This...
This USB twin on-board socket (2x maximum 3.6A) is equipped...
These spoilers, which are mounted on the original BMW hand...