Clear indicator lens for BMW R1200CL
These clear or grey indicator lenses give your BMW a quite sporty look.
Supplied as pairs.
Amber bulbs included!
Screws that are too long will break the lense!
For: R 1100/1150 GS/Adv.,
R 850/1100/1150 R,
R 1100 S (rear),
R 850/1200 C/I & Montauk,
K 1200 RS & GT (rear)
The lens head screws (article number 3552-781-1) are too short for the indicator housings (black or chrome) of BMW R850C/R1200C and R1200CL! The original BMW screws must be used for these motorcycle models!
The indicator lenses only fit for the indicator housing shown on picture 6!
Please pay attention to the installation instructions, the FAQs and the sample mounting video, so that neither the pin breaks off nor the glass with the screw breaks during installation.
There is a video for this product - watch here!
Clear indicator lens
Article-No. : L30103 Availability: immediately available Show details
Grey indicator lens
Article-No. : L30103-g Availability: immediately available Show details
4 pieces high-alloyed lens head screw with cross slot
Do not fit for the turn signal housing (black or chrome) of the BMW R850C/R1200C and R1200CL!
Article-No. : 3552-781-1 Availability: immediately available Show details
Questions about this article Do I also need the screws 3552-781-1?
The screws 3552-781-1 are a bit shorter than the original screws. This makes the installation easier and you can't break the lenses that easy. But those screws are of course not a must have. You can for example also cut the original screws.
Do I have to cut one pin of the 12V/10W (or 12V/21W) bulbs?
Depending on the socket, it may be possible that you need to cut or to file off one of the pins.
Related / Recommended Products
Either orange or with special coating. The special...
Reflector red, rectangular, self-adhesive, with E-mark...
Bulb Rear Light
Bulb 12V 21/5W BAY15d S25x47mm...