SP Connect Bar Clamp Mount Pro for BMW R 1200 GS (04-12), R 1200 GS Adv (05-13) & HP2
All Models

The SP Connect Bar Clamp Mount Pro is the perfect way to attach your smartphone to the motorcycle in a matter of seconds, flexibly and intuitively. The Bar Clamp Mount Pro can be mounted on the handlebar clamp and offers a pivoting and rotating head in order to be able to position the smartphone optimally. The smartphone can be fixed in both portrait and landscape format.
The Bar Clamp Mount Pro has an M8 fastening screw that can be fastened in an M8 thread. Please check whether your motorcycle has a corresponding M8 thread!
Install Instruction SP Connect Bar Clamp Mount Pro
Note: If a smartphone with a mechanical image stabilizer is attached to the Bar Clamp Mount Pro, we recommend using an additional vibration-dampening module (item 688066) to best prevent damage to the smartphone's camera that can be caused by vibrations from motorcycle engines. The Anti Vibration Module reduces vibrations by up to 60%. The head of the Bar Clamp Mount Pro is easily interchangeable with the anti-vibration module, which allows the smartphone to be fixed directly on the vibration-damping module with a 90° clockwise rotation. However, if problems occur, the Bar Clamp Mount Pro should no longer be used in combination with this smartphone!
Install Instruction SP Anti Vibration Module
Either the SP Universal Interface or the SP Universal Phone Clamp can be used to attach the smartphone to the Bar Clamp Mount Pro.
The SP Universal Interface makes any phone case or other device compatible with the SPC+ system. This is a flat and robust pad that is equipped with a 3M adhesive film for flexible use. For installation, the protective film of the adhesive pad is removed and pressed onto the back of the smartphone case or other device. For best results, it should be positioned as centrally as possible.
Note: Wireless charging is not guaranteed when using this product.
Attention: The use of the SP Universal Interface is at your own risk! Observe the information in the installation instructions!
Install Instruction SP Universal Interface
The SP Universal Phone Clamp SPC+ fits smartphones with a maximum thickness of 12mm and a width between 58 and 85mm. The smartphone clamp mount has a simple and rock-solid locking system: simply pull out the crown, screw it tight and fix the crown by pushing it in. The clamp bracket can be adjusted without tools.
Note: Wireless charging is not guaranteed when using this product.
Install Instruction SP Universal Phone Clamp
The Bar Clamp Mount Pro has an M8 fastening screw that can be fastened in an M8 thread. Please check whether your motorcycle has a corresponding M8 thread!
Install Instruction SP Connect Bar Clamp Mount Pro
Note: If a smartphone with a mechanical image stabilizer is attached to the Bar Clamp Mount Pro, we recommend using an additional vibration-dampening module (item 688066) to best prevent damage to the smartphone's camera that can be caused by vibrations from motorcycle engines. The Anti Vibration Module reduces vibrations by up to 60%. The head of the Bar Clamp Mount Pro is easily interchangeable with the anti-vibration module, which allows the smartphone to be fixed directly on the vibration-damping module with a 90° clockwise rotation. However, if problems occur, the Bar Clamp Mount Pro should no longer be used in combination with this smartphone!
Install Instruction SP Anti Vibration Module
Either the SP Universal Interface or the SP Universal Phone Clamp can be used to attach the smartphone to the Bar Clamp Mount Pro.
The SP Universal Interface makes any phone case or other device compatible with the SPC+ system. This is a flat and robust pad that is equipped with a 3M adhesive film for flexible use. For installation, the protective film of the adhesive pad is removed and pressed onto the back of the smartphone case or other device. For best results, it should be positioned as centrally as possible.
Note: Wireless charging is not guaranteed when using this product.
Attention: The use of the SP Universal Interface is at your own risk! Observe the information in the installation instructions!
Install Instruction SP Universal Interface
The SP Universal Phone Clamp SPC+ fits smartphones with a maximum thickness of 12mm and a width between 58 and 85mm. The smartphone clamp mount has a simple and rock-solid locking system: simply pull out the crown, screw it tight and fix the crown by pushing it in. The clamp bracket can be adjusted without tools.
Note: Wireless charging is not guaranteed when using this product.
Install Instruction SP Universal Phone Clamp
SP Connect Bar Clamp Mount Pro
Art. No. 688037
EUR 74,90
incl. VAT, plus shippingUSD: $82.32GBP: £62.72AUD: A$123.49JPY: ¥13,059
Availability: immediately available
SP Anti Vibration Module SPC+
Art. No. 688066
EUR 34,95
incl. VAT, plus shippingUSD: $38.41GBP: £29.27AUD: A$57.62JPY: ¥6,094
Availability: immediately available
SP Universal Phone Case small SPC+
For smartphones with a maximum size of approx. 153 x 70 mm
Art. No. 688060921
EUR 29,90
incl. VAT, plus shippingUSD: $32.86GBP: £25.04AUD: A$49.30JPY: ¥5,213
Availability: Upon request
SP Universal Interface SPC+
Art. No. 688061
EUR 29,95
incl. VAT, plus shippingUSD: $32.92GBP: £25.08AUD: A$49.38JPY: ¥5,222
Availability: on short call
SP Universal Phone Clamp SPC+
Art. No. 688063
EUR 34,90
incl. VAT, plus shippingUSD: $38.36GBP: £29.22AUD: A$57.54JPY: ¥6,085
Availability: immediately available
Product questions
Reviews
No reviews pending
Product Safety Information
Related / Recommended Products


Smartphone support Quiklox for handlebarsView details
With this smartphone holder (item 105730) you always have...
EUR 34,90

Connection cable for additional device for 12V on-board socketView details
With this connection cable, you can connect all 12-volt a...
EUR 34,90






