Seat Conversion Form:

Alteration of your rider seat

Black synthetic leather (for other colors, please ask).

  • 25mm lower is not possible if you already have the low original seat
  • After lowering your seat there should be at least 30mm of foam left (sitting comfort)

Problems (if yes, mark the check box)

You slide forwards (every time you brake).
You have tailbone problems. If you have a low seat, this can only be corrected in conjunction with raising the seat by at least 20mm
You have pressure on your thighs while standing (e.g. when dismounting)
You want the front part of the seat to be thinner (standing more stable after stopping).
You want the rear part of the seat to be wider (if possible).
Is the original seat too soft?
Is the original seat too hard?
Should we retrofit a seat heater?
Has the seat ever been modified before (recognizable e.g. by additional stapler holes in the seat shell)?

Alteration of your passenger seat

Black synthetic leather (for other colors, please ask).

  • 25mm lower is not possible if you already have the low original seat
  • After lowering your seat there should be at least 30mm of foam left (sitting comfort)

Problems (if yes, mark the check box)

You slide forwards (every time you brake).
You have tailbone problems.
You have pressure on your thighs while standing (e.g. when dismounting)
You want the rear part of the seat to be wider (if possible).
Is the original seat too soft?
Is the original seat too hard?
Should we retrofit a seat heater?
Has the seat ever been modified before (recognizable e.g. by additional stapler holes in the seat shell)?

IMPORTANT INFORMATION :

The higher a seat should be, the harder the seat must be in order to avoid wrinkles. If a seat should be higher and soft at the same time, wrinkles in the leather are inevitable with time! Seats that were already altered before cannot always be altered again! Our upholsterer can only decide whether a seam needs to be made / can be made after he has received the information on your form.

Note: We accept no liability if, for example, tools that are attached to the bottom of the seat's plastic shell, screws or the like, are sent to us together with the seat and then lost during the upholstering process. We only need the seat. We have to charge extra costs.

Comment: