Maintenance-free Regina chain kits are the best choice for getting the power of your machine onto the road.
The chain kit for the BMW F700GS consists of an open chain with a rivet lock with 116 chain links and a ratio of 17/42, a pinion and a sprocket.
The chain kit for the BMW F800GS consists of an open chain with a rivet lock with 116 chain links and a ratio of 16/42, a pinion and a sprocket.
Caution: On the BMW F800GS, the rear chainring is attached with either M8 or M10 screws! Item no. 302-KHPE fits only for M8 (hole in the chainring 8,5mm), item no. 337-KHPE fits only for M10 (hole in the chainring 10,3mm)! Before ordering, please unscrew a screw and check the hole in the chainring!
Our chain kits are supplied with solid rivet master links.
The chain riveting tool (article number 4991) is suitable for hollow rivets and solid rivets. Solid rivets are riveted using a punch and a hammer.
Please follow the assembly instructions.
Install instruction item 4991
The KTW 2.5 chain tool (article number 940150) is suitable for hollow rivets and requires the supplementary set 940250 for solid rivets. If you wish to use the KTW 2.5 chain tool (article number 940150) for our chain kits, you must also order the supplementary set 940250! With the KTW 2.5, riveting is carried out simply by tightening the tool using a torque wrench.
Please follow the assembly instructions.
Install instruction item 940150
Only the correct Oil filter ensures that your oil is free of...
The chain and sprockets kit for your BMW F800GS (2008)...
Clutch linings from Lucas are among the best in the...