Important information
Regular maintenance is a must for a reliable and good motorcycle. Under normal driving conditions you can do the service a few hundred km sooner or later.
Subsequent you will find technical data as well as maintenance and service information.
We make no claim to completeness or accuracy of all data, these are only for your information.

Spares for BMW G310GS


Technical data

Model BMW G310GS 2017-
Volume (ccm) 313
Cylinders 1
Power (HP) 34
Power (KW) 25
Weight (kg) 170
Seat height (mm) 835
Idle speed (R/Min) 1600 ± 100
Injection Injection 42 mm
Tyre pressure front (bar) 1,7
Tyre pressure rear (bar) 1,9
Spark plug 1 NGK LMAR9D-J
Spark Plug 1 -
Standpipe 41 mm USD fork
Drive Chain
Fork oil per rod 430 ML SAE 7,5W
Engine Oil Without Filter SAE 15W-50
Engine Oil With Filter 1,65 L API SJ
Gearbox Oil -
Break Fluid DOT 4
Final Drive Oil -
Fuel tank volume 11
Coolant water+


6.000 miles (10.000 km) service (30.000 km / 50.000 km):

Performing vehicle test with BMW Motorrad diagnostic system
Oil change, engine, with filter (annually, or every 10,000km)
Checking coolant level
Checking/adjusting clutch play
Checking freedom of movement of throttle cable and checking for kinks and chafing
Checking front brake pads and brake discs for wear
Checking rear brake discs and brake pads for wear
Visual inspection of the brake pipes, brake hoses and connections
Checking tire pressures and tread depth
Checking chain sag
Checking brake-fluid level, front brakes
Checking brake-fluid level, rear brakes
Change front and rear brake fluid (first time after 1 year, then every 2 years)
Checking steering-head bearing
Lubricate side stand
Check lighting and signaling system
Function test of engine start suppression
Final inspection and check of roadworthiness
Setting service-due date and service countdown distance
Checking battery charge state
Confirming BMW Service in on-board documentation

12.000 miles (20.000km) service (40.000 km / 60.000 km):

Performing vehicle test with BMW Motorrad diagnostic system
Oil change, engine, with filter (annually, or every 10,000km)
Checking valve clearance (every 20.000 km)
Replace all spark plugs (every 20.000 km)
Replace air filter cartridge (every 20,000 km)
Changing fluid in telescopic forks (every 20.000 km)
Renew chain set (every 20.000 km)
Checking coolant level
Checking/adjusting clutch play
Checking freedom of movement of throttle cable and checking for kinks and chafing
Checking front brake pads and brake discs for wear
Checking rear brake discs and brake pads for wear
Visual inspection of the brake pipes, brake hoses and connections
Checking tire pressures and tread depth
Checking brake-fluid level, front brakes
Change front and rear brake fluid (first time after 1 year, then every 2 years)
Checking brake-fluid level, rear brakes
Checking steering-head bearing
Lubricate side stand
Replace hoses from intake silencer to cylinder head and tank ventilation valve (every 4 years, or every 40,000 km)
Replace fuel filter and fuel hoses (every 4 years, or every 40,000 km)
Check lighting and signaling system
Function test of engine start suppression
Final inspection and check of roadworthiness
Setting service-due date and service countdown distance
Checking battery charge state
Confirming BMW Service in on-board documentation