-19% VAT for deliveries to NON EU countries! VAT will be deducted after entering the address!

Important information
Regular maintenance is a must for a reliable and good motorcycle. Under normal driving conditions you can do the service a few hundred km sooner or later.
Subsequent you will find technical data as well as maintenance and service information.
We make no claim to completeness or accuracy of all data, these are only for your information.

Spares for BMW R1200CL

Technical data

Parts list for maintenance intervals/service for BMW R1200CL 2002-2005

Model BMW R1200CL 2002-2005
Volume (ccm) 1170
Cylinders 2
Power (HP) 61
Power (KW) 45
Weight (kg) 308
Seat height (mm) 745
Idle speed (R/Min) 750 ± 150
Injection Injection
Tyre pressure front (bar) 2,2 (2,5)
Tyre pressure rear (bar) 2,5 (2,9)
Spark plug 1 NGK BKR7EKC (-03)
Spark Plug 1 BKR7EKC+DCPR8EKC
Standpipe 41 mm Telelever
Drive Cardan
Fork oil per rod 470 ML SAE 10W
Engine Oil Without Filter 3,5 L SAE 20W-50
Engine Oil With Filter 3,75 L
Gearbox Oil 800 ML SAE 90 GL-5
Break Fluid DOT 4
Final Drive Oil 200 ML SAE 90 GL-5
Fuel tank volume 17.5
Coolant air-/oil-cooled

Running-in Check / 600 miles (1.000 km) service:

Reading fault memory with BMW Motorrad diagnostic system
Change oil when engine at regular operating temperature, renew oil filter
Oil change, rear wheel drive
Checking security of rear wheel screws
Checking swinging-arm pivot mount
Checking operation of side-stand switch
Tightening cylinder head
Adjusting valve clearance
Checking freedom of movement of throttle cable and checking for kinks and chafing
Checking/adjusting synchronisation
Checking tire pressures and tread depth
Checking lights and signalling equipment
Test ride as final inspection and function check

6.000 miles (10.000 km) service (30.000 km / 50.000 km):

Reading fault memory with BMW Motorrad diagnostic system
Checking clutch fluid level
Change the clutch fluid (every 4 years)
Change oil when engine at regular operating temperature, renew oil filter
Gearbox-oil change (every 2 years)
Oil change, rear wheel drive (every 2 years)
Checking battery acid level
Cleaning and greasing battery terminals
Checking front and rear brake fluid level
Checking front and rear brake pads for wear
Checking front and rear brake discs for wear
Changing brake fluid, front and rear brakes
Checking operation of side-stand switch
Greasing side stand pivot
Checking condition of spark plugs
Adjusting valve clearance
Checking freedom of movement of throttle cable and checking for kinks and chafing
Checking/adjusting synchronisation
Checking tire pressures and tread depth
Checking lights and signalling equipment
Test ride as final inspection and function check
Confirming BMW Service in on-board documentation

12.000 miles (20.000km) service (40.000 km / 60.000 km):

Reading fault memory with BMW Motorrad diagnostic system
Checking clutch fluid level
Change the clutch fluid (every 4 years)
Change oil when engine at regular operating temperature, renew oil filter
Changing oil in gearbox, warmed to normal operating temperature
Oil change, rear wheel drive (every 2 years)
Replace the fuel filter (every 40.000 km)
Checking battery acid level
Cleaning and greasing battery terminals
Replacing intake air filter
Checking front and rear brake fluid level
Visual inspection of the brake pipes, brake hoses and connections
Changing brake fluid, front and rear brakes
Checking front and rear brake pads for wear
Checking front and rear brake discs for wear
Checking rear wheel bearing play by tilting wheel
Checking swinging-arm pivot mount
Checking operation of side-stand switch
Greasing side stand pivot
Replace belt for generator (every 40.000 km)
Replacing spark plugs
Adjusting valve clearance
Checking freedom of movement of throttle cable and checking for kinks and chafing
Checking/adjusting synchronisation
Checking tire pressures and tread depth
Checking lights and signalling equipment
Test ride as final inspection and function check
Confirming BMW Service in on-board documentation

Maintenance Intervals / Maintenance Plan / Customer Service for Your BMW R1200CL

 

For the elegant cruiser with a boxer engine – the BMW R1200CL – you will find important information on this page about the recommended maintenance intervals, typical service tasks, and the appropriate replacement and wear parts. At Hornig, you receive expert advice, high-quality components, and specially assembled service kits for your inspections.

 

Recommended Maintenance Intervals – Overview

The BMW R1200CL combines classic cruiser styling with the robustness of an air/oil-cooled boxer engine. Nevertheless, regular maintenance is essential for performance, safety, and maintaining value. Typical intervals:

  • Break-in / Initial Inspection: After approx. 1,000 km – engine oil change including filter, valve clearance check, visual and functional inspection.
  • Standard Service: Usually every 10,000 km (approx. 6,000 miles) – including oil & filter change, brake check, electrical check, and valve clearance adjustment.
  • Major Service: Every approx. 20,000 km (12,000 miles) or regularly according to the manufacturer’s plan – includes additional tasks such as air filter replacement, spark plugs, brake fluid, and driveshaft/gearbox oil change.
  • Operating Fluids & Brake Fluid Change: Brake fluid at least every 1–2 years; check and replace gearbox and driveshaft oil depending on usage and mileage.

 

Typical Service Tasks During Maintenance

  • Change engine oil & oil filter – for a clean, well-lubricated engine; at Hornig you will find matching filters and oils.
  • Check & adjust valve clearance – particularly important for BMW boxer engines to minimize noise and maintain engine efficiency.
  • Check or replace spark plugs – for stable ignition and reliable engine performance.
  • Air & fuel filter service – inspect or clean filters to reduce dust and ensure clean combustion.
  • Check brake system & brake pads – inspect wear, brake fluid, and brake discs; suitable brake pads available from Hornig.
  • Inspect drivetrain & gearbox system – check oil levels, inspect driveshaft bearings, check seals for leaks.
  • Check electrical system & lighting – inspect battery, charging system, and all lighting components.
  • Visual inspection & fasteners – inspect bolts, cables, throttle cables, wheels & tires for tightness and wear.

 

Service Parts & Maintenance Kits from Hornig

Hornig provides a comprehensive range of spare parts and maintenance kits specifically for the BMW R1200CL, including:

  • Engine & gearbox oils with the correct specification
  • Oil filters, air filters, fuel filters, seals
  • Spark plugs & ignition system components
  • Brake pads, brake discs & brake fluid
  • Driveshaft bearings, lubricants & shaft seals
  • Batteries & electrical spare parts

With these kits, you can perform inspections such as oil changes, filter replacements, or brake service efficiently in your home workshop or at a partner workshop.

 

Practical Tips for Your BMW R1200CL

  • Keep a service record – a complete maintenance history significantly increases resale value.
  • Use only replacement parts & operating fluids with the correct approval – Hornig will assist you with selection.
  • For frequent short trips or high loads, shorter inspection intervals may be useful.
  • For longer storage periods (e.g., winter break): change oil beforehand, disconnect the battery & stabilize the fuel.
  • Work on safety-relevant components such as brakes or driveshafts should be carried out by a professional workshop if in doubt.

 

Implement Your Maintenance Plan Now & Order Parts

Make use of the recommended maintenance intervals for your BMW R1200CL and order suitable service parts directly from Hornig. Whether oil change, brake service, or filter replacement – with high-quality products and professional advice, every maintenance service can be completed smoothly and reliably.

 

Note: This information serves as a guideline. For exact service intervals, inspection details, and maintenance work, please consult your BMW’s owner’s manual or an authorized professional workshop.