Important information
Regular maintenance is a must for a reliable and good motorcycle. Under normal driving conditions you can do the service a few hundred km sooner or later.
Subsequent you will find technical data as well as maintenance and service information.
We make no claim to completeness or accuracy of all data, these are only for your information.
Spares for BMW R1200RT (2005-2013)
| BMW R1200RT 2005-2009 |
| 1170 |
| 2 |
| 110 |
| 80 |
| 259 |
| 820 |
| 1150 ± 50 |
| Injection |
| 2,2 (2,5) |
| 2,5 (2,9) |
| NGK DCPR8EKC |
| NGK DCPR8EIX |
| 35 mm Telelever |
| Cardan |
| - |
| SAE 15W-50 |
| 4,0 L MIN. API SJ |
| 800 ML 75W-90 GL-5 |
| DOT 4 |
| 180 ML 75W-90 GL-5 |
| 27 |
| air-/oil-cooled |
Setting service-due date and service countdown distance | |
Reading fault memory with BMW Motorrad diagnostic system | |
Performing bleed test with the BMW Motorrad diagnostic system | |
Oil change, engine, with filter | |
Oil change, rear wheel drive | |
Tightening cylinder head fasteners | |
Adjusting valve clearance | |
Checking front and rear brake fluid level | |
Checking freedom of movement of throttle cable and checking for kinks and chafing | |
Checking tire pressures and tread depth | |
Checking lights and signalling equipment | |
Function test, engine start suppression | |
Checking synchronisation | |
Final inspection and check of roadworthiness | |
Confirming BMW Service in on-board documentation |
Reading fault memory with BMW Motorrad diagnostic system | |
Oil change, rear wheel drive | |
Gearbox-oil change (every 2 years) | |
Replace belt for generator (every 6 years) | |
Adjusting valve clearance | |
Visual inspection of the hydraulic clutch system | |
Changing brake fluid in Integral ABS wheel circuit, front and rear | |
Change brake fluid in entire ABS control circuit | |
Checking freedom of movement of throttle cable and checking for kinks and chafing | |
Checking tire pressures and tread depth | |
Checking ease of movement of side stand | |
Checking ease of movement of centre stand | |
Checking specified torque of threaded fasteners with torque wrench: centre stand | |
Checking lights and signalling equipment | |
Function test, engine start suppression | |
Brake check for BMW Motorrad Integral ABS | |
Checking synchronisation | |
Final inspection and check of roadworthiness | |
Checking battery charge state | |
Confirming BMW Service in on-board documentation |
Reading fault memory with BMW Motorrad diagnostic system | |
Oil change, engine, with filter | |
Oil change, rear wheel drive | |
Gearbox-oil change (every 2 years or every 40.000 km) | |
Adjusting valve clearance | |
Replace all spark plugs (every 40.000 km) | |
Replace air filter cartridge | |
Replace belt for generator (every 40.000 km) | |
Visual inspection of the hydraulic clutch system | |
Checking front and rear brake discs for wear | |
Checking front and rear brake pads for wear | |
Changing brake fluid in Integral ABS wheel circuit, front and rear | |
Change brake fluid in entire ABS control circuit | |
Checking freedom of movement of wire cables and checking for kinks and chafing | |
Checking tire pressures and tread depth | |
Checking ease of movement of side stand | |
Checking ease of movement of centre stand | |
Checking specified torque of threaded fasteners with torque wrench: centre stand | |
Checking lights and signalling equipment | |
Function test, engine start suppression | |
Brake check for BMW Motorrad Integral ABS | |
Checking synchronisation | |
Final inspection and check of roadworthiness | |
Checking battery charge state | |
Confirming BMW Service in on-board documentation |