Important information
Regular maintenance is a must for a reliable and good motorcycle. Under normal driving conditions you can do the service a few hundred km sooner or later.
Subsequent you will find technical data as well as maintenance and service information.
We make no claim to completeness or accuracy of all data, these are only for your information.

Spares for BMW R1200S & HP2 Sport


Technical data

Model BMW R1200S 2006-2008
Volume (ccm) 1170
Cylinders 2
Power (HP) 122
Power (KW) 90
Weight (kg) 213
Seat height (mm) 830
Idle speed (R/Min) 1100 ± 50
Injection Injection
Tyre pressure front (bar) 2,2 (2,5)
Tyre pressure rear (bar) 2,5 (2,9)
Spark plug 1 NGK DCPR8EKC
Spark Plug 1 NGK DCPR8EIX
Standpipe 41 mm Telelever
Drive Cardan
Fork oil per rod 600 ML SAE 10W
Engine Oil Without Filter SAE 15W-50
Engine Oil With Filter 4,0L MIN.API SJ
Gearbox Oil 800 ML 75W-90 GL-5
Break Fluid DOT 4
Final Drive Oil 180 ML 75W-90 GL-5
Fuel tank volume 17
Coolant air-/oil-cooled


Running-in Check / 600 miles (1.000 km) service:

Reading fault memory with BMW Motorrad diagnostic system
Oil change, engine, with filter
Oil change, rear wheel drive
Tightening cylinder head (R1200S)
Adjusting valve clearance
Checking front and rear brake fluid level
Checking freedom of movement of cables and checking for kinks and chafing
Checking tire pressures and tread depth
Checking lights and signalling equipment
Checking battery charge state (HP2 Sport)
Function test, engine start suppression
Checking/adjusting synchronisation
Final inspection and check of roadworthiness
Confirming BMW Service in on-board documentation

6.000 miles (10.000 km) service (30.000 km / 50.000 km):

Reading fault memory with BMW Motorrad diagnostic system (R1200S)
Oil change, engine, with filter (R1200S)
Oil change, rear wheel drive (R1200S, every 2 years)
Gearbox-oil change (R1200S, every 2 years)
Replace belt for generator (R1200S, every 40.000 km)
Adjusting valve clearance (R1200S)
Visual inspection of the hydraulic clutch system (R1200S)
Visual inspection of the brake pipes, brake hoses and connections (R1200S)
Checking front and rear brake pads for wear (R1200S)
Checking front and rear brake discs for wear (R1200S)
Checking front and rear brake fluid level (R1200S)
Changing brake fluid, front and rear brakes (R1200S)
Checking freedom of movement of cables and checking for kinks and chafing (R1200S)
Checking tire pressures and tread depth (R1200S)
Checking ease of movement of side stand (R1200S)
Checking lights and signalling equipment (R1200S)
Function test, engine start suppression (R1200S)
Checking/adjusting synchronisation (R1200S)
Final inspection and check of roadworthiness (R1200S)
Checking battery charge state (R1200S)
Confirming BMW Service in on-board documentation (R1200S)

12.000 miles (20.000km) service (40.000 km / 60.000 km):

Reading fault memory with BMW Motorrad diagnostic system (R1200S)
Oil change, engine, with filter (R1200S)
Oil change, rear wheel drive (R1200S, every 2 years)
Gearbox-oil change (R1200S, every 2 years)
Adjusting valve clearance (R1200S)
Replacing spark plugs (R1200S, every 40.000 km)
Replace air filter cartridge (R1200S)
Replace belt for generator (R1200S, every 40.000 km)
Visual inspection of the hydraulic clutch system (R1200S)
Visual inspection of the brake pipes, brake hoses and connections (R1200S)
Checking front and rear brake pads for wear (R1200S)
Checking front and rear brake discs for wear (R1200S)
Checking front and rear brake fluid level (R1200S)
Changing brake fluid, front and rear brakes (R1200S)
Checking freedom of movement of cables and checking for kinks and chafing (R1200S)
Checking tire pressures and tread depth (R1200S)
Checking ease of movement of side stand (R1200S)
Checking lights and signalling equipment (R1200S)
Function test, engine start suppression (R1200S)
Checking/adjusting synchronisation (R1200S)
Final inspection and check of roadworthiness (R1200S)
Checking battery charge state (R1200S)
Confirming BMW Service in on-board documentation (R1200S)

Maintenance Intervals / Maintenance Plan / Customer Service for Your BMW R1200S & HP2 Sport

 

The BMW R1200S and the rare BMW HP2 Sport represent sporty boxer performance and exclusive technology. Careful customer service is particularly important for these machines: it ensures not only performance but also durability and value retention. At Hornig, you will find all relevant replacement and wear parts – from oil filters to valve adjustment kits to special grease – suitable for your R1200S or HP2 Sport.

 

Recommended Service Intervals – Compact Overview

The maintenance cycles for the R1200S and HP2 Sport combine manufacturer specifications with practical experience:

  • Break-in / Initial Inspection: After approx. 1,000 km – check oil level, oil filter, valve clearance, and basic visual inspection.
  • Regular Service: Usually every 10,000 km – engine oil & filter, brakes, visual and functional check.
  • Major Service: Every 20,000 km or according to the owner's manual – additionally air filter, spark plugs, gearbox / driveshaft oil, and if necessary valve adjustment.
  • Brake & Operating Fluid Change: Change brake fluid regularly, check gearbox oil according to the service plan.

 

Typical Maintenance Tasks During Customer Service

  • Engine oil & oil filter change – essential for longevity and clean engine performance.
  • Check & adjust valve clearance – very important for sporty boxer engines.
  • Spark plug service – check and replace if necessary.
  • Check or replace air filter.
  • Inspect driveshaft or gearbox drive: oil change, seals, and bearings check.
  • Maintain brake system: regularly check pads, discs, and brake fluid.
  • Electrical system & battery: check charge level, inspect electrical components.
  • General visual inspection: regularly check screws, cables, tires, and fittings.

 

Service Parts & Maintenance Kits from Hornig

At Hornig, we offer a selection of high-quality maintenance parts ideally suited for your R1200S or HP2 Sport:

  • Engine oil (for sporty boxer)
  • Oil filters & seals
  • Spark plugs & ignition system components
  • Air filter
  • Driveshaft / gearbox oil and sealing materials
  • Special grease for spark plug connectors (e.g., silicone grease)
  • Batteries & electrical replacement parts

 

Community Tips & Experiences for R1200S / HP2 Sport

Owners of the R1200S and HP2 Sport regularly exchange maintenance experiences in forums and online communities:

  • Some R1200S owners report on Reddit that they regularly synchronize the throttle bodies to ensure smooth throttle response.
  • Others recommend monitoring the battery charge level during long storage or infrequent use and using a maintenance charger if necessary – this protects the already rare and valuable HP2 battery.
  • A frequent tip is to pay attention not only to valve clearance tolerance but also to thermal conditions to get more accurate values.

 

Practical Maintenance Tips for Your R1200S / HP2 Sport

  • Keep a complete service record in the service booklet or digitally – this helps with maintenance and resale.
  • If you work on your bike yourself: use community posts for tips on valve adjustment, synchronization, or driveshaft service.
  • Use chargers during long storage periods to keep the battery healthy.
  • Regularly check driveshaft oil – changing it according to intervals ensures smooth drive operation.
  • Use the recommended special grease for spark plug connectors to avoid connection issues.

 

Implement Your Maintenance Plan Now & Order Parts

Use the recommended maintenance intervals for your BMW R1200S or HP2 Sport and order suitable replacement and service parts directly from Hornig. From oil changes to spark plugs to driveshaft care – with high-quality components and competent advice, you will carry out your maintenance efficiently, safely, and sustainably.

 

Note: These details are for guidance only. For exact maintenance plans, inspection values, or scope of inspections, please consult your motorcycle’s owner manual or a certified BMW workshop.