-19% VAT for deliveries to NON EU countries! VAT will be deducted after entering the address!

Important information
Regular maintenance is a must for a reliable and good motorcycle. Under normal driving conditions you can do the service a few hundred km sooner or later.
Subsequent you will find technical data as well as maintenance and service information.
We make no claim to completeness or accuracy of all data, these are only for your information.

Spares for your BMW R1250RS

Technical data

Parts list for maintenance intervals/service for BMW R1250RS

Model BMW R1250RS
Volume (ccm) 1254
Cylinders 2
Power (HP) 136
Power (KW) 100
Weight (kg) 243
Seat height (mm) 820
Idle speed (R/Min) 1050 ± 100
Injection Injection 52 mm
Tyre pressure front (bar) 2,5
Tyre pressure rear (bar) 2,9
Spark plug 1 NGK LMAR8AI-10
Spark Plug 1 -
Standpipe USD fork
Drive Cardan
Fork oil per rod 521 ML
Engine Oil Without Filter SAE 5W-40
Engine Oil With Filter 4,0 L MIN. API SL
Gearbox Oil -
Break Fluid DOT 4
Final Drive Oil 180 ML 70W-80 HYPO
Fuel tank volume 18
Coolant water+

6.000 miles (10.000 km) service (30.000 km / 50.000 km):

Performing vehicle test with BMW Motorrad diagnostic system
Oil change, engine, with filter (annually, or every 10,000km)
Oil change, rear wheel drive (every 2 years or every 20,000km)
Changing fluid in telescopic forks (every 30.000 km)
Visual inspection of the hydraulic clutch system
Visual inspection of the brake pipes, brake hoses and connections
Checking front brake pads and brake discs for wear
Checking brake-fluid level, front brakes
Checking rear brake discs and brake pads for wear
Checking brake-fluid level, rear brakes
Change front and rear brake fluid (first time after 1 year, then every 2 years)
Checking steering-head bearing
Checking coolant level
Checking tire pressures and tread depth
Checking spoke tension, adjusting if necessary
Checking ease of movement of side stand
Checking ease of movement of main stand
Check lighting and signaling system
Function test of engine start suppression
Final inspection and check of roadworthiness
Setting service-due date and service countdown distance
Checking battery charge state
Confirming BMW Service in on-board documentation

12.000 miles (20.000km) service (40.000 km / 60.000 km):

Performing vehicle test with BMW Motorrad diagnostic system
Oil change, engine, with filter (annually, or every 10,000km)
Checking valve clearance (every 20.000 km)
Replace all spark plugs (every 20.000 km)
Replace air filter cartridge (every 20,000 km)
Oil change, rear wheel drive (every 2 years or every 20,000km)
Changing fluid in telescopic forks (every 30.000 km)
Visual inspection and lubrication of the cardan shaft (every 20,000 km)
Replace cardan shaft (every 60,000 km)
Visual inspection of the hydraulic clutch system
Visual inspection of the brake pipes, brake hoses and connections
Checking front brake pads and brake discs for wear
Checking brake-fluid level, front brakes
Checking rear brake discs and brake pads for wear
Checking brake-fluid level, rear brakes
Change front and rear brake fluid (first time after 1 year, then every 2 years)
Checking steering-head bearing
Checking coolant level
Checking tire pressures and tread depth
Checking spoke tension, adjusting if necessary
Checking ease of movement of side stand
Checking ease of movement of main stand
Check lighting and signaling system
Function test of engine start suppression
Final inspection and check of roadworthiness
Setting service-due date and service countdown distance
Checking battery charge state
Confirming BMW Service in on-board documentation

Maintenance Intervals / Maintenance Plan / Customer Service for the BMW R1250RS

Welcome to Hornig – your specialist for motorcycle service and spare parts. On this page, you will find all important information about maintenance intervals, service, and inspection plans for your BMW R1250RS. Additionally, we show you which items from our range are ideal for customer service.

 

Why Regular Maintenance is Crucial for the BMW R1250RS

Regular service according to manufacturer and BMW guidelines is the key to reliability, safety, and long-term value retention. Only in this way will engine performance, chassis, and safety systems remain in top condition permanently. With the right service parts from Hornig, you can perform maintenance and service efficiently yourself or optimally equip your workshop.

 

Recommended Maintenance Intervals & Service Plan

  • Running-in check: First check after approx. 1,000 km – basic inspection, check oil level, if necessary oil change and visual inspection of important components.
  • Regular service: approx. every 10,000 km or annually – including engine oil + filter, visual and functional checks, service reset.
  • Major service: depending on use and mileage, e.g., every 20,000 km – including additional tasks such as air filter, spark plugs, brake fluid check/change, possibly transmission/drive oil, valve clearance check.
  • Long-term maintenance & wear inspection: Regular checks of brakes, tires, chassis, electrics, drive, and safety-relevant components – according to driving profile and usage (long distance, short distance, city, touring).

 

Typical Maintenance & Service Tasks for Your BMW R1250RS

  • Engine oil change including oil filter – essential for engine protection and longevity.
  • Air filter replacement – especially important in frequent city traffic or dusty environments.
  • Inspection or replacement of spark plugs – for smooth performance and reliable starting.
  • Brake system check: brake pads, discs, brake lines, and brake fluid – safety is the highest priority.
  • Drive/final drive (e.g., cardan drive, transmission) check and oil change or lubrication if necessary – for smooth power transmission and durability.
  • Visual and functional inspection: tires (air pressure, tread depth), chassis, steering head bearings, lighting & electrics, stand, safety functions, etc.
  • Service reset or documenting service history – important for value retention and traceability.

 

Suitable Service and Wear Parts from Hornig

For your BMW R1250RS, Hornig offers a wide range of high-quality components and service kits: engine oil and oil filters, air filter elements, spark plugs, brake fluid and brake pads, lubricants for drive/transmission as well as seals and O-rings. This way you can reliably and safely perform all maintenance and service work with tested parts.

 

How to Choose the Right Maintenance Scope

Depending on mileage, usage profile, and riding habits, you should adjust the maintenance scope:

  • Basic maintenance (oil change, visual check) → approx. every 10,000 km or once a year.
  • Extended service (filters, spark plugs, brakes, drive) → every 20,000 km or as needed.
  • Intensive use (e.g., touring, city traffic, short distances) → possibly shorten intervals, regular visual & functional checks.

 

Advantages of Regular Maintenance with Hornig

  • Ensuring safety and reliability – especially important for sport tourers like the R1250RS.
  • Preservation of engine performance and optimal riding comfort through proper maintenance and high-quality parts.
  • Value retention and complete service history – important for resale or warranty claims.
  • Convenience and overview – with suitable service kits and clear maintenance plans.

 

Notes and Recommendations

Please note: The stated intervals and maintenance steps are based on manufacturer and experience values. Depending on riding style, route, and load, earlier or more frequent maintenance may be advisable. For binding information, please consult your BMW R1250RS owner's manual or a qualified specialist workshop.

Implement your maintenance plan consistently — with Hornig as a reliable partner for high-quality service and wear parts. This way your BMW R1250RS remains powerful, safe, and retains its value for a long time.