-19% VAT for deliveries to NON EU countries! VAT will be deducted after entering the address!

Important information
Regular maintenance is a must for a reliable and good motorcycle. Under normal driving conditions you can do the service a few hundred km sooner or later.
Subsequent you will find technical data as well as maintenance and service information.
We make no claim to completeness or accuracy of all data, these are only for your information.

Spares for BMW RnineT

Technical data

Parts list for maintenance intervals/service for BMW RnineT 2014-2016
Parts list for maintenance intervals/service for BMW RnineT 2017- (Euro 4)
Parts list for maintenance intervals/service for BMW RnineT Pure
Parts list for maintenance intervals/service for BMW RnineT Racer
Parts list for maintenance intervals/service for BMW RnineT Scrambler
Parts list for maintenance intervals/service for BMW RnineT Urban G/S

Model BMW RnineT 2014-2016
Volume (ccm) 1170
Cylinders 2
Power (HP) 110
Power (KW) 81
Weight (kg) 222
Seat height (mm) 785
Idle speed (R/Min) 1150 ± 50
Injection Injection 50 mm
Tyre pressure front (bar) 2,5
Tyre pressure rear (bar) 2,5 (2,9)
Spark plug 1 NGK MAR8B-JDS
Spark Plug 1 -
Standpipe 46 MM USD-GABEL
Drive Cardan
Fork oil per rod -
Engine Oil Without Filter SAE 15W-50
Engine Oil With Filter 4,0 L MIN. API SJ
Gearbox Oil 700 ML 75W-90 SYN.
Break Fluid DOT 4
Final Drive Oil 180 ML 75W-90 SYN.
Fuel tank volume 18
Coolant air-/oil-cooled

Running-in Check / 600 miles (1.000 km) service:

Reading fault memory with BMW Motorrad diagnostic system
Oil change, engine, with filter
Oil change, rear wheel drive
Take up slack at cylinder head nuts (R1200R)
Adjusting valve clearance (R1200R)
Checking front and rear brake fluid level
Checking freedom of movement of throttle cable and checking for kinks and chafing
Checking tire pressures and tread depth
Checking lights and signalling equipment
Function test, engine start suppression
Checking synchronisation
Final inspection and check of roadworthiness
Confirming BMW Service in on-board documentation
Readjusting steering-head bearing (RnineT)
Checking spoke tension, adjusting if necessary (RnineT)

6.000 miles (10.000 km) service (30.000 km / 50.000 km):

Reading fault memory with BMW Motorrad diagnostic system
Oil change, engine, with filter
Oil change, rear wheel drive (every 2 years)
Gearbox-oil change (every 2 years)
Replace belt for generator (R1200R, every 6 years)
Adjusting valve clearance
Visual inspection of the hydraulic clutch system
Visual inspection of the brake pipes, brake hoses and connections
Checking front and rear brake discs for wear
Checking front and rear brake pads for wear
Changing brake fluid, front and rear brakes
Checking front and rear brake fluid level
Checking freedom of movement of throttle cable and checking for kinks and chafing
Checking tire pressures and tread depth
Checking ease of movement of side stand
Checking lights and signalling equipment
Function test, engine start suppression
Checking synchronisation
Final inspection and check of roadworthiness
Checking battery charge state
Checking ease of movement of centre stand (RnineT)
Confirming BMW Service in on-board documentation

12.000 miles (20.000km) service (40.000 km / 60.000 km):

Reading fault memory with BMW Motorrad diagnostic system
Oil change, engine, with filter
Oil change, rear wheel drive
Gearbox-oil change
Adjusting valve clearance
Replace all spark plugs (every 40.000 km)
Replace air filter cartridge
Replace belt for generator (every 40.000 km)
Visual inspection of the hydraulic clutch system
Visual inspection of the brake pipes, brake hoses and connections
Checking front and rear brake discs for wear
Checking front and rear brake pads for wear
Changing brake fluid, front and rear brakes
Checking front and rear brake fluid level
Checking freedom of movement of throttle cable and checking for kinks and chafing
Checking tire pressures and tread depth
Checking ease of movement of side stand
Checking lights and signalling equipment
Function test, engine start suppression
Checking synchronisation
Final inspection and check of roadworthiness
Checking battery charge state
Confirming BMW Service in on-board documentation

Maintenance Intervals / Maintenance Plan / Customer Service for Your BMW R nineT

 

For the iconic BMW R nineT (air/oil-cooled two-cylinder boxer engine), here you will find all important information about the recommended inspection intervals, typical service tasks, and suitable replacement and wear parts. At Hornig, we offer you high-quality components, carefully assembled service kits, and expert advice to keep your R nineT reliable, powerful, and durable.

 

Recommended Maintenance Intervals – Overview

The air/oil-cooled drive of your R nineT requires regular maintenance to preserve performance and riding pleasure. According to BMW and community experience values, the typical intervals are as follows:

  • Break-in / Initial inspection: after approx. 1,000 km – engine oil change, oil filter, valve clearance check, visual inspection of important components.
  • Standard service: Every approx. 10,000 km (or 6,000 miles) or annually – including oil and filter change, valve clearance, spark plugs, and diagnostic test.
  • Valve check / synchronization: On many models, a valve clearance check is recommended every 10,000 km.
  • Operating & gearbox oil change: The ribbed belt (generator belt) must be checked at certain maintenance intervals.
  • Brake fluid: According to the community, often to be changed every 2 years – depending on the actual condition.

 

Typical Service Tasks During Customer Service

  • Change engine oil & oil filter – central for the engine's lifespan.
  • Check & adjust valve clearance – an important element for air-cooled boxer engines.
  • Inspect / replace spark plugs – ensures reliable ignition.
  • Check or replace air filter – especially important for short trips or dusty conditions.
  • Brake system: Check brake pads, discs, and brake fluid.
  • Drive & gearbox: Check oil levels, inspect seals.
  • Check ribbed belt: Inspect belt for cracks or wear.
  • Electrical & lighting: Check battery, cable connections, lights, and signaling systems.
  • Visual inspection & fasteners: Check screw connections, cables, throttle cables, tires for secure fit and wear.

 

Service Parts & Maintenance Kits from Hornig

At Hornig you will find maintenance parts specially suited for the R nineT:

  • Engine & gearbox oils according to BMW specifications
  • Oil filter, air filter & gaskets
  • Spark plugs & ignition system components
  • Brake pads, brake discs & brake fluid (DOT)
  • Ribbed belt (generator belt)
  • Batteries & electrical spare parts

With these components, you can efficiently carry out inspections yourself or hand over everything prepared to your workshop.

 

Community Tips & Experiences from the R nineT Scene

Owners share valuable maintenance experiences in forums and community groups:

  • A common tip: Oil changes every 10,000 km (6,000 miles) or annually are seen by many DIY riders as a reasonable compromise – even for bikes ridden little.
  • With a suitable diagnostic tool, the customer service reminder can be reset by yourself.
  • Another forum post warns against delaying maintenance too much: "Just ride and enjoy the bike" is popular, but regular oil and filter changes prevent long-term engine damage.

 

Practical Tips for Your BMW R nineT

  • Keep a complete service documentation – a well-maintained service booklet is valuable.
  • Use community knowledge: Many R nineT riders recommend not neglecting oil changes and valve clearance.
  • If you work on your bike yourself: A diagnostic tool like the Bike-Scan 100 can help you reset the service warning yourself.
  • Even with little use, an annual oil change is sensible – oil ages even without many kilometers.
  • For safety-relevant work like belt replacement or valve adjustment, consult a professional workshop if unsure.

 

Implement Your Maintenance Plan & Order Parts from Hornig Now

Use the recommended maintenance intervals for your BMW R nineT and order suitable replacement and service parts directly from Hornig. Whether oil change, filter service, or belt maintenance – with high-quality components and professional advice, you can perform your customer service efficiently, safely, and sustainably.

 

Note: This information is for guidance only. For exact maintenance plans, inspection scopes, or test values, please consult your BMW owner’s manual or a qualified professional workshop.