Important information
Regular maintenance is a must for a reliable and good motorcycle. Under normal driving conditions you can do the service a few hundred km sooner or later.
Subsequent you will find technical data as well as maintenance and service information.
We make no claim to completeness or accuracy of all data, these are only for your information.

Spares for BMW S1000XR (2020- )


Technical data

Model BMW S1000XR (2020- )
Volume (ccm) 999
Cylinders 4
Power (HP) 165
Power (KW) 121
Weight (kg) 226
Seat height (mm) 840
Idle speed (R/Min) 1270 ± 50
Injection Injection 48mm
Tyre pressure front (bar) 2,5
Tyre pressure rear (bar) 2,9
Spark plug 1 NGK LMAR9FI-10G
Spark Plug 1 -
Standpipe 45mm USD fork
Drive Chain
Fork oil per rod SAE 10W
Engine Oil Without Filter SAE 5W-40
Engine Oil With Filter 4,0 L MIN. API SJ
Gearbox Oil -
Break Fluid DOT 4
Final Drive Oil -
Fuel tank volume 20,0
Coolant water+


6.000 miles (10.000 km) service (20.000 km / 40.000 km / 50.000 km / 70.000 km / 80.000 km):

Performing vehicle test with BMW Motorrad diagnostic system
Oil change, engine, with filter (annually, or every 10,000km)
Replace air filter cartridge
Visual inspection of the brake pipes, brake hoses and connections
Checking front brake pads and brake discs for wear
Checking brake-fluid level, front brakes
Checking rear brake discs and brake pads for wear
Checking brake-fluid level, rear brakes
Change front and rear brake fluid (first time after 1 year, then every 2 years)
Checking steering-head bearing
Checking coolant level
Checking clutch cable and clutch lever play
Checking and lubricating chain drive
Checking tire pressures and tread depth
Check inserts in the pannier rack
Checking ease of movement of side stand
Check lighting and signaling system
Lubricate side stand
Function test of engine start suppression
Final inspection and check of roadworthiness
Setting service-due date and service countdown distance
Checking battery charge state
Confirming BMW Service in on-board documentation

18.000 miles (30.000km) service (60.000 km / 90.000 km):

Performing vehicle test with BMW Motorrad diagnostic system
Oil change, engine, with filter (annually, or every 10,000km)
Checking valve clearance (every 30.000 km)
Checking valve timing (every 30.000 km)
Replace all spark plugs (every 30.000 km)
Replace air filter cartridge
Changing fluid in telescopic forks (every 30.000 km)
Visual inspection of the brake pipes, brake hoses and connections
Checking front brake pads and brake discs for wear
Checking brake-fluid level, front brakes
Checking rear brake discs and brake pads for wear
Checking brake-fluid level, rear brakes
Change front and rear brake fluid (first time after 1 year, then every 2 years)
Checking steering-head bearing
Checking coolant level
Checking clutch cable and clutch lever play
Checking and lubricating chain drive
Checking tire pressures and tread depth
Check inserts in the pannier rack
Checking ease of movement of side stand
Lubricate side stand
Check lighting and signaling system
Function test of engine start suppression
Final inspection and check of roadworthiness
Setting service-due date and service countdown distance
Checking battery charge state
Confirming BMW Service in on-board documentation