-19% VAT for deliveries to NON EU countries! VAT will be deducted after entering the address!

Important information
Regular maintenance is a must for a reliable and good motorcycle. Under normal driving conditions you can do the service a few hundred km sooner or later.
Subsequent you will find technical data as well as maintenance and service information.
We make no claim to completeness or accuracy of all data, these are only for your information.

Spares for BMW F800R

Technical data

Model BMW F800R 2009-2014
Volume (ccm) 798
Cylinders 2
Power (HP) 87
Power (KW) 64
Weight (kg) 199
Seat height (mm) 800
Idle speed (R/Min) 1250 ± 50
Injection Injection 46 mm
Tyre pressure front (bar) 2,5
Tyre pressure rear (bar) 2,9
Spark plug 1 NGK DCPR8E
Spark Plug 1 NGK DCPR8EIX
Standpipe 43 mm telescopic fork
Drive Chain
Fork oil per rod 584 ML/ 7,5 SAE
Engine Oil Without Filter SAE 15W-50
Engine Oil With Filter 3,0 L MIN. API SJ
Gearbox Oil -
Break Fluid DOT 4
Final Drive Oil -
Fuel tank volume 16
Coolant water+

Running-in Check / 600 miles (1.000 km) service:

Setting service-due date and countdown distance
Performing vehicle test with BMW Motorrad diagnostic system
Engine-oil change, with filter
Checking coolant level
Checking/adjusting clutch play
Checking freedom of movement of throttle cable and checking for kinks and chafing
Checking brake-fluid level, front and rear brakes
Checking specified torque of threaded fasteners with torque wrench: front brake calipers
Checking tire pressure
Adjusting steering-head bearing play
Checking specified torque of threaded fasteners with torque wrench: main frame, front footrest plates, exhaust manifold, side stand
Checking and lubricating chain drive
Checking lights and signaling equipment
Function test, engine start suppression
Final inspection and check of roadworthiness
Confirming BMW Service in on-board documentation

6.000 miles (10.000 km) service (30.000 km / 50.000 km):

Reading fault memory with BMW Motorrad diagnostic system
Oil change, engine, with filter
Checking coolant level
Checking/adjusting clutch play
Checking freedom of movement of throttle cable and checking for kinks and chafing
Checking front brake pads and brake discs for wear
Checking rear brake pads and brake disc for wear
Visual inspection of the brake pipes, brake hoses and connections
Check tire pressures and tread depth
Checking and lubricating chain drive
Change brake fluid in entire system
Checking steering-head bearing
Checking ease of movement of side stand
Checking lights and signaling equipment
Function test, engine start suppression
Final inspection and check of roadworthiness
Setting service-due date and service countdown distance
Checking battery charge state
Confirming BMW Service in on-board documentation

12.000 miles (20.000km) service (40.000 km / 60.000 km):

Reading fault memory with BMW Motorrad diagnostic system
Oil change, engine, with filter
Checking valve clearance
Replace all spark plugs (every 40.000 km)
Replace air filter cartridge
Checking coolant level
Checking/adjusting clutch play
Checking freedom of movement of throttle cable and checking for kinks and chafing
Checking front brake pads and brake discs for wear
Checking rear brake pads and brake disc for wear
Visual inspection of the brake pipes, brake hoses and connections
Check tire pressures and tread depth
Checking and lubricating chain drive
Change brake fluid in entire system
Checking steering-head bearing
Checking ease of movement of side stand
Checking lights and signaling equipment
Function test, engine start suppression
Final inspection and check of roadworthiness
Setting service-due date and service countdown distance
Checking battery charge state
Confirming BMW Service in on-board documentation