Since the BMW R100 belongs to the older generation of the BMW model history, there are certainly signs of wear over time in Gear ✅. In our shop you find the matching products to replace worn transmission parts. Because the R100 has a gear transmission, you can find different gears from 1-gear to 5-gear for R2V models. They can be ordered individually. Several gearwheels for the long 5-gear are marked as from 4/1982 with an "X", due to the standard changed angle of pressure of the gearing. Available as replacement of the standard gearwheel in a fine ground version. Equally you obtain various gearbox bearing sets, like the gearbox bearing set PLUS, including cylindrical roller bearing, the gearbox bearing set for R2V-models with 5-speed gearbox a RS set gearwheels for R2V 5-gear models as from 4/1982-*, as well as a intermediate shaft or counter shaft for R2V 5-gear.
Even with sufficient maintenance gum will be hard and cracked with time. Then a seal fulfills no longer its intended purpose. Therefore, you can find different gearbox gasket set for the R100 with and without kick-starter. Available for the models R2V from 9/1980-*; R2V *-9/1980, 5 Gear or R2V-Paralever R80/100GS, PD, R80/100R, Mystic, R80GS Basic.
For the gearbox output shaft of R2V Paralever and R2V Monolever, the gearbox input shaft of R2V-models or the gearbox shift lever for the R2V 9/1974-* we offer you a rotary seal. Gearbox cover gasket for R2V 5-gear or 4-gear, seals for the drive housing rear and final drive housing cover gaskets are available and many more wearing and replacement parts.
So that a tour is fun, everything should work smoothly on the motorcycle. In this category you will find foot gear change lever GS, with roller for R80/100GS, R80/100R + Mystic, R65GS, R80 G/S after 01/84 and R80 ST after 01/84 in a normal and short version, a shift fork, cylindrical roller bearing as well as a bushing remake for R2V 5-Gear.
Our assortment includes also clamps for rubber bellow between swingarm and transmission for R2V *-9/1980 and R2V 9/1980-*, Idle switch for all two valve-boxer models, an gasket for the gearbox idle switch, rubber grommet improved remake made of NBR for R2V and the rubber outer boot for the models R2V, R4V & K2V.
