Important information
Regular maintenance is a must for a reliable and good motorcycle. Under normal driving conditions you can do the service a few hundred km sooner or later.
Subsequent you will find technical data as well as maintenance and service information.
We make no claim to completeness or accuracy of all data, these are only for your information.

Spares for BMW R1100RS, BMW R1150RS


Technical data

Model BMW R1100RS 1993-1995 & 1996-2001
Volume (ccm) 1085
Cylinders 2
Power (HP) 90
Power (KW) 66
Weight (kg) 246
Seat height (mm) 780
Idle speed (R/Min) 1000 ± 150
Injection Injection
Tyre pressure front (bar) 2,2 (2,5)
Tyre pressure rear (bar) 2,5 (2,9)
Spark plug 1 NGK BKR7EKC
Spark Plug 1 NGK BKR7EIX
Standpipe 35 mm Telelever
Drive Cardan
Fork oil per rod 470 ML SAE 10W
Engine Oil Without Filter 3,5 L SAE 20W-50
Engine Oil With Filter 3,75 L
Gearbox Oil 800 ML SAE 90 GL-5
Break Fluid DOT 4
Final Drive Oil 230 ML SAE 90 GL-5
Fuel tank volume 23
Coolant air-/oil-cooled


Running-in Check / 600 miles (1.000 km) service:

Change oil when engine at regular operating temperature, renew oil filter
Oil change, rear wheel drive
Tightening cylinder head
Adjusting valve clearance
Checking freedom of movement of throttle cable and checking for kinks and chafing
Checking swinging arm bearing
Checking operation of side-stand switch
Checking/adjusting synchronisation
Checking tire pressures and tread depth
Checking lights and signalling equipment
Test ride as final inspection and function check
Confirming BMW Service in on-board documentation
Changing oil in gearbox, warmed to normal operating temperature (R1100RS)
Checking clutch play (R1100RS)
Tension Poly-V belt (R1100RS)
Tightening hose clamp at intake manifold (R1100RS)
Checking front and rear brake fluid level (R1100RS)
Checking security of rear wheel screws (R1100RS)
Checking security of screws for adjustable handlebars (R1100RS)
Checking idle speed (R1100RS)
Checking throttle valves (R1100RS)
Greasing side stand pivot (R1150RS)

6.000 miles (10.000 km) service (30.000 km / 50.000 km):

Change oil when engine at regular operating temperature, renew oil filter
Adjusting valve clearance
Checking condition of spark plugs
Checking battery acid level
Cleaning and greasing battery terminals
Checking freedom of movement of throttle cable and checking for kinks and chafing
Tension Poly-V belt
Checking front and rear brake pads for wear
Checking front and rear brake discs for wear
Checking front and rear brake fluid level
Changing brake fluid, front and rear brakes
Lubricating side stand
Checking operation of side-stand switch
Checking/adjusting synchronisation
Checking tire pressures and tread depth
Checking lights and signalling equipment
Test ride as final inspection and function check
Confirming BMW Service in on-board documentation
Changing oil in gearbox, warmed to normal operating temperature (R1100RS)
Oil change, rear wheel drive (R1100RS)
Checking clutch play (R1100RS)
Checking swinging arm bearing (R1100RS)
Lubricating centre stand (R1100RS)
Lubricating nipple of clutch cable (R1100RS)
Lubricating bottom spring-strut eye (R1100RS)
Checking idle speed (R1100RS)
Checking throttle valves (R1100RS)
Gearbox-oil change (R1150RS, every 2 years)
Oil change, rear wheel drive (R1150RS, every 2 years)
Checking clutch fluid level (R1150RS)
Change the clutch fluid (R1150RS, every 4 years)

12.000 miles (20.000km) service (40.000 km / 60.000 km):

Change oil when engine at regular operating temperature, renew oil filter
Changing oil in gearbox, warmed to normal operating temperature
Adjusting valve clearance
Replacing spark plugs
Replace the fuel filter (every 40.000 km)
Checking battery acid level
Cleaning and greasing battery terminals
Replacing intake air filter
Checking freedom of movement of throttle cable and checking for kinks and chafing
Replace belt for generator (every 40.000 km)
Checking front and rear brake pads for wear
Checking front and rear brake discs for wear
Checking front and rear brake fluid level
Changing brake fluid, front and rear brakes
Checking swinging arm bearing
Lubricating side stand
Checking operation of side-stand switch
Cleaning and greasing shaft for windscreen adjuster
Checking/adjusting synchronisation
Checking tire pressures and tread depth
Checking lights and signalling equipment
Test ride as final inspection and function check
Confirming BMW Service in on-board documentation
Oil change, rear wheel drive (R1100RS)
Checking clutch play (R1100RS)
Tension Poly-V belt (R1100RS)
Checking wheel bearings (R1100RS)
Lubricating centre stand (R1100RS)
Lubricating nipple of clutch cable (R1100RS)
Lubricating bottom spring-strut eye (R1100RS)
Checking idle speed (R1100RS)
Checking throttle valves (R1100RS)
Oil change, rear wheel drive (R1150RS, every 2 years)
Visual inspection of the brake pipes, brake hoses and connections (R1150RS)
Checking clutch fluid level (R1150RS)
Change the clutch fluid (R1150RS, every 4 years)
Checking rear wheel bearing play by tilting wheel (R1150RS)

Maintenance Intervals / Maintenance Plan / Customer Service for Your BMW R1100RS & R1150RS

 

For your sporty touring boxer motorcycles BMW R1100RS and BMW R1150RS, here you will find all important information about maintenance intervals, typical service tasks, and suitable replacement & wear parts. At Hornig, you benefit from expert advice, high-quality service kits, and original components to keep your BMW reliable, powerful, and safe.

 

Recommended Maintenance Intervals – Overview

The R RS models with air/oil-cooled boxer engine and shaft drive are robust but require regular inspections to ensure performance, safety, and longevity:

  • Break-in / Initial Inspection: After approximately 1,000 km – oil change, oil filter, check valve clearance, as well as visual and functional inspection.
  • Standard Service: Usually every 10,000 km – including oil change, filters, valves, spark plugs, and electrical check.
  • Major Service: About every 20,000 km or according to the manufacturer's maintenance schedule – additionally check and replace air filter, brake fluid, gearbox and final drive oil.
  • Operating Fluids & Brake Fluid Change: Brake fluid at least every 1–2 years; check and replace gearbox and shaft drive oil as needed depending on usage (e.g., with Hornig shaft drive oil).
  • Belt Maintenance: At certain service intervals, the ribbed generator belt should be checked and replaced if necessary. The BMW maintenance manual explicitly recommends belt replacement every 40,000 km.

 

Typical Service Tasks During Customer Service

  • Change engine oil & oil filter – essential for reliable operation.
  • Check & adjust valve clearance – especially important for air/oil-cooled boxer engines.
  • Inspect / replace spark plugs – for smooth and stable ignition.
  • Air & fuel filter service – check or replace filters depending on usage.
  • Check brake system: Inspect brake pads, discs, lines, and brake fluid condition and function.
  • Drive & transmission: Inspect shaft drive, check oil levels, inspect seals.
  • Inspect / replace generator belt: The ribbed belt to the generator should be regularly checked for wear and replaced if necessary.
  • Electrical & lighting: Check battery, cable connections, lights, and signaling devices.
  • Visual inspection & fasteners: Check screws, cables, throttle cables, wheels & tires for tightness and wear.

 

Service Parts & Maintenance Kits from Hornig

At Hornig you will find a wide range of spare parts specifically for the BMW R1100RS & R1150RS:

  • Engine & transmission oils
  • Oil filters, air filters, fuel filters, seals
  • Spark plugs & ignition system components
  • Brake pads, brake discs & brake fluid
  • Shaft drive / final drive parts, shaft seals & lubricants
  • Ribbed belt: e.g., the suitable generator belt for your R RS models.
  • Batteries, connection sets & electrical spare parts

With these components, you can efficiently perform maintenance work such as oil changes, brake service, filter replacements, or generator belt changes yourself or supply your workshop.

 

Practical Tips for Your BMW R1100RS / R1150RS

  • Keep a complete service booklet – a flawless maintenance record significantly increases resale value.
  • Use only replacement parts & operating fluids with the correct specifications – Hornig will gladly advise you.
  • Regularly check the condition of the generator belt – cracks, wear, or smoothing can indicate the need for replacement.
  • After longer storage periods (e.g., winter break): perform oil change, battery care & visual inspection.
  • Safety: Work on brakes, shaft drive or generator belts should be carried out by a qualified professional workshop if in doubt.

 

Implement Your Maintenance Plan Now & Order Parts

Use the recommended service intervals for your BMW R1100RS & BMW R1150RS and order your spare parts directly from Hornig. Whether oil change, brake, or belt service – with high-quality parts and competent advice, every customer service can be performed efficiently and reliably.

 

Note: This information serves as a guideline. For exact maintenance schedules, service intervals, or inspection values, please consult your motorcycle's owner's manual or an authorized BMW workshop.