Important information
Regular maintenance is a must for a reliable and good motorcycle. Under normal driving conditions you can do the service a few hundred km sooner or later.
Subsequent you will find technical data as well as maintenance and service information.
We make no claim to completeness or accuracy of all data, these are only for your information.
| | BMW R1100S 1998-2005 |
| | 1085 |
| | 2 |
| | 98 |
| | 72 |
| | 229 |
| | 800 |
| | 1100 ± 150 |
| | Injection |
| | 2,5 |
| | 2,5 (2,9) |
| | NGK BKR7EKC (-03) |
| | 03-: + DCPR8EKC |
| | 35 mm Telelever |
| | Cardan |
| | -2000: 0,17 L / 2001-: 0,47 L |
| | 3,5 L SAE 15W-50 |
| | 3,75 liters API SJ |
| | 800 ML SAE 90 GL-5 |
| | DOT 4 |
| | 230 ML SAE 90 GL-5 |
| | 18 |
| | air-/oil-cooled |
| Reading fault memory with BMW Motorrad diagnostic system | |
| Change oil when engine at regular operating temperature, renew oil filter | |
| Oil change, rear wheel drive | |
| Checking swinging arm bearing | |
| Checking operation of side-stand switch | |
| Greasing side stand pivot | |
| Tightening cylinder head | |
| Adjusting valve clearance | |
| Checking freedom of movement of throttle cable and checking for kinks and chafing | |
| Checking/adjusting synchronisation | |
| Checking tire pressures and tread depth | |
| Checking lights and signalling equipment | |
| Test ride as final inspection and function check | |
| Confirming BMW Service in on-board documentation |
| Reading fault memory with BMW Motorrad diagnostic system | |
| Change oil when engine at regular operating temperature, renew oil filter | |
| Gearbox-oil change (every 2 years) | |
| Oil change, rear wheel drive (every 2 years) | |
| Checking battery acid level | |
| Cleaning and greasing battery terminals | |
| Checking front and rear brake discs for wear | |
| Checking front and rear brake pads for wear | |
| Checking front and rear brake fluid level | |
| Changing brake fluid, front and rear brakes | |
| Checking clutch fluid level | |
| Change the clutch fluid (every 4 years) | |
| Checking operation of side-stand switch | |
| Greasing side stand pivot | |
| Checking condition of spark plugs | |
| Adjusting valve clearance | |
| Checking freedom of movement of throttle cable and checking for kinks and chafing | |
| Checking/adjusting synchronisation | |
| Checking tire pressures and tread depth | |
| Checking lights and signalling equipment | |
| Test ride as final inspection and function check | |
| Confirming BMW Service in on-board documentation |
| Reading fault memory with BMW Motorrad diagnostic system | |
| Change oil when engine at regular operating temperature, renew oil filter | |
| Changing oil in gearbox, warmed to normal operating temperature | |
| Oil change, rear wheel drive | |
| Replace the fuel filter (every 40.000 km) | |
| Checking battery acid level | |
| Cleaning and greasing battery terminals | |
| Replacing intake air filter | |
| Checking front and rear brake discs for wear | |
| Checking front and rear brake pads for wear | |
| Checking front and rear brake fluid level | |
| Visual inspection of the brake pipes, brake hoses and connections | |
| Changing brake fluid, front and rear brakes | |
| Checking clutch fluid level | |
| Change the clutch fluid (every 4 years) | |
| Checking rear wheel bearing play by tilting wheel | |
| Checking swinging arm bearing | |
| Checking operation of side-stand switch | |
| Greasing side stand pivot | |
| Replace belt for generator (every 40.000 km) | |
| Replacing spark plugs | |
| Adjusting valve clearance | |
| Checking freedom of movement of throttle cable and checking for kinks and chafing | |
| Checking/adjusting synchronisation | |
| Checking tire pressures and tread depth | |
| Checking lights and signalling equipment | |
| Test ride as final inspection and function check | |
| Confirming BMW Service in on-board documentation |
For the sporty and compact BMW R1100S, we provide you on this page with all important information about recommended inspection intervals, service tasks, and suitable replacement or wear parts. At Hornig, we support you with expert advice, high-quality service kits, and original components – ensuring that your R1100S remains reliable, powerful, and safe.
According to the official maintenance plan, the first inspection of your BMW R1100S is due after approx. 1,000 km, followed by recurring services.
At Hornig, you will find a comprehensive range of spare parts and maintenance kits specifically for the BMW R1100S, such as:
These service kits are ideal for carrying out inspections efficiently, reliably, and professionally – whether in your own garage or with the support of your workshop.
Follow the recommended maintenance intervals of your BMW R1100S and order your maintenance parts directly from Hornig. Whether oil change, brake service, or belt replacement – with high-quality components and competent advice, you can carry out your customer service efficiently, reliably, and safely.
Note: This information is for orientation purposes. For binding maintenance intervals, replacement procedures, or inspection details, please refer to your BMW’s owner’s manual or an authorized workshop.