Important information
Regular maintenance is a must for a reliable and good motorcycle. Under normal driving conditions you can do the service a few hundred km sooner or later.
Subsequent you will find technical data as well as maintenance and service information.
We make no claim to completeness or accuracy of all data, these are only for your information.

You can find all spare parts for your BMW R1200ST here.


  BMW R1200ST 2005-2008      
Technical Specifications:              
Capacity: 1170 ccm
Cylinder: 2
HP/KW: 110/81
Weight (kg): 229
Seat height (mm): 830
Valve clearance (in): cold 0,15 mm
Valve clearance (out): cold 0,30 mm
Idle speed: 1150 ▒ 50 R/MIN
Injection: Injection
Tire pressure (front): 2,2 (2,5) bar
Tire pressure (rear): 2,5 (2,9) bar
Spark plug 1: NGK DCPR8EKC
Spark plug 2: NGK DCPR8EIX
Standpipe ě: 35 mm telelever
Drive: Kardan
       
Capacities:      
Fork oil per rod:  
Engine oil without filter: SAE 15W-50
Engine oil with filter: 4,0 L min. API SJ
Transmission oil: 700 ml SAE 90 GL-5
Brake fluid: DOT 4
Final drive oil: 180 ml 75W-140 GL-5
Fuel: 21,0 litres
Coolant: air-/ oil-cooled




Running-in Check / 600 miles (1.000 km) service:

Reading fault memory with BMW Motorrad diagnostic system
Oil change, engine, with filter
Oil change, rear wheel drive
Tightening cylinder head fasteners
Adjusting valve clearance
Checking front and rear brake fluid level
Checking freedom of movement of throttle cable and checking for kinks and chafing
Checking tire pressures and tread depth
Checking lights and signalling equipment
Function test, engine start suppression
Checking synchronisation
Final inspection and check of roadworthiness
Confirming BMW Service in on-board documentation

6.000 miles (10.000 km) service (30.000 km / 50.000 km):

Reading fault memory with BMW Motorrad diagnostic system
Oil change, engine, with filter
Oil change, rear wheel drive (every 2 years)
Gearbox-oil change (every 2 years)
Replace belt for generator (every 40.000 km)
Adjusting valve clearance
Visual inspection of the hydraulic clutch system
Checking front and rear brake discs for wear
Checking front and rear brake pads for wear
Changing brake fluid, front and rear brakes
Checking front and rear brake fluid level
Checking freedom of movement of throttle cable and checking for kinks and chafing
Checking tire pressures and tread depth
Checking ease of movement of side stand
Checking lights and signalling equipment
Function test, engine start suppression
Checking synchronisation
Final inspection and check of roadworthiness
Checking battery charge state
Confirming BMW Service in on-board documentation

12.000 miles (20.000km) service (40.000 km / 60.000 km):

Reading fault memory with BMW Motorrad diagnostic system
Oil change, engine, with filter
Oil change, rear wheel drive (every 2 years)
Gearbox-oil change (every 2 years)
Adjusting valve clearance
Replace all spark plugs (every 40.000 km)
Replace air filter cartridge
Replace the fuel filter (every 40.000 km)
Replace belt for generator (every 40.000 km)
Visual inspection of the hydraulic clutch system
Visual inspection of the brake pipes, brake hoses and connections
Checking front and rear brake pads for wear
Checking front and rear brake discs for wear
Checking front and rear brake fluid level
Changing brake fluid, front and rear brakes
Checking freedom of movement of throttle cable and checking for kinks and chafing
Checking tire pressures and tread depth
Checking ease of movement of side stand
Checking lights and signalling equipment
Function test, engine start suppression
Checking synchronisation
Final inspection and check of roadworthiness
Checking battery charge state
Confirming BMW Service in on-board documentation