These LED fog lights fit for all motorcycles with crash bar or similar mounting possibility. The set consists of two additional LED lights, which can be mounted to crash bars (diameter 21-25mm). They will be connected to the battery. The switch will be mounted onto your handlebar. These lights do not require any change of the electric system of your motorcycle. If you do not want the headlights to possibly be switched on when the motorcycle is switched off, we recommend using the CLS Connect module, item number 127.00.010.
With EG homologation.
2x LED fog lights (12V, 14W)
Switch (switch mounting only for tubular handlebars)
Note: The fixation clamps are also suitable for a pipe diameter of 27mm. All you need to do is use a M6x50 Allen screw (instead of the supplied M6x45) (see image 3).
With our mounting kit (part no. LS5113), you can mount our additional lights even if you do not have any crash bar on your BMW R1250R. Attention: LS5113 must be mounted in a right-left reversed way on the R1250R!
If the plus cable of the headlights is too short for your motorcycle, you can extend it with our item S23004138. Our cable ties (item 3800105 / 3800115) are also helpful for mounting the headlights.
Bulb Parking Light / License Plate Light
Repair plug for indicators / licence plate illumination...