-19% VAT for deliveries to NON EU countries! VAT will be deducted after entering the address!

Important information
Regular maintenance is a must for a reliable and good motorcycle. Under normal driving conditions you can do the service a few hundred km sooner or later.
Subsequent you will find technical data as well as maintenance and service information.
We make no claim to completeness or accuracy of all data, these are only for your information.

Spares for your BMW R1250R

Technical data

Parts list for maintenance intervals/service for BMW R1250R

Model BMW R1250R
Volume (ccm) 1254
Cylinders 2
Power (HP) 136
Power (KW) 100
Weight (kg) 239
Seat height (mm) 820
Idle speed (R/Min) 1050 ± 100
Injection Injection 52 mm
Tyre pressure front (bar) 2,5
Tyre pressure rear (bar) 2,9
Spark plug 1 NGK LMAR8AI-10
Spark Plug 1 -
Standpipe USD-GABEL
Drive Cardan
Fork oil per rod 590 ML
Engine Oil Without Filter SAE 5W-40
Engine Oil With Filter 4,0 L MIN. API SL
Gearbox Oil -
Break Fluid DOT 4
Final Drive Oil 180 ML 70W-80 HYPO
Fuel tank volume 18
Coolant approx. 1,5 L (water+)

6.000 miles (10.000 km) service (30.000 km / 50.000 km):

Performing vehicle test with BMW Motorrad diagnostic system
Oil change, engine, with filter (annually, or every 10,000km)
Oil change, rear wheel drive (every 2 years or every 20,000km)
Changing fluid in telescopic forks (every 30.000 km)
Visual inspection of the hydraulic clutch system
Visual inspection of the brake pipes, brake hoses and connections
Checking front brake pads and brake discs for wear
Checking brake-fluid level, front brakes
Checking rear brake discs and brake pads for wear
Checking brake-fluid level, rear brakes
Change front and rear brake fluid (first time after 1 year, then every 2 years)
Checking steering-head bearing
Checking coolant level
Checking tire pressures and tread depth
Checking spoke tension, adjusting if necessary
Checking ease of movement of side stand
Checking ease of movement of main stand
Check lighting and signaling system
Function test of engine start suppression
Final inspection and check of roadworthiness
Setting service-due date and service countdown distance
Checking battery charge state
Confirming BMW Service in on-board documentation

12.000 miles (20.000km) service (40.000 km / 60.000 km):

Performing vehicle test with BMW Motorrad diagnostic system
Oil change, engine, with filter (annually, or every 10,000km)
Checking valve clearance (every 20.000 km)
Replace all spark plugs (every 20.000 km)
Replace air filter cartridge (every 20,000 km)
Oil change, rear wheel drive (every 2 years or every 20,000km)
Changing fluid in telescopic forks (every 30.000 km)
Visual inspection and lubrication of the cardan shaft (every 20,000 km)
Replace cardan shaft (every 60,000 km)
Visual inspection of the hydraulic clutch system
Visual inspection of the brake pipes, brake hoses and connections
Checking front brake pads and brake discs for wear
Checking brake-fluid level, front brakes
Checking rear brake discs and brake pads for wear
Checking brake-fluid level, rear brakes
Change front and rear brake fluid (first time after 1 year, then every 2 years)
Checking steering-head bearing
Checking coolant level
Checking tire pressures and tread depth
Checking spoke tension, adjusting if necessary
Checking ease of movement of side stand
Checking ease of movement of main stand
Check lighting and signaling system
Function test of engine start suppression
Final inspection and check of roadworthiness
Setting service-due date and service countdown distance
Checking battery charge state
Confirming BMW Service in on-board documentation

Maintenance Intervals / Maintenance Plan / Customer Service for Your BMW R 1250 R

 

For your modern BMW R 1250 R with a water-cooled boxer engine, you will find compact and practical information here on recommended maintenance intervals, typical service tasks, and suitable replacement or wear parts. At Hornig, we support you with high-quality components, service kits, and expert advice to ensure your R 1250 R remains reliable, powerful, and safe.

 

Recommended Maintenance Intervals – Short Overview

The state-of-the-art ShiftCam boxer engine of the R 1250 R requires regular inspections to ensure longevity and performance. According to the maintenance plan and rider experience, the following intervals apply:

  • Break-in / Initial inspection: After about 1,000 km – visual inspection, oil level check, and first oil change recommended.
  • Standard service: Every approx. 10,000 km or once a year – including engine oil change, filter, spark plugs, diagnostics, and inspection of essential components.
  • Major service: Every 20,000 km (or according to the maintenance plan) – additional tasks such as valve clearance check and changing the oil in the final drive / bevel gear.
  • Operating fluids & brake fluid change: Brake fluid regularly (often every ~2 years), control and replacement intervals for final drive oil according to the service plan.

 

Typical Service Tasks During Customer Service

  • Change engine oil & oil filter: Important for smooth operation and optimal engine protection.
  • Check & adjust valve clearance if necessary: The ShiftCam engine requires regular checks for correct valve clearance values.
  • Check / replace spark plugs: For stable ignition and optimal combustion.
  • Replace air filter: Especially recommended for frequent riding or dusty environments.
  • Transmission / final drive (cardan): Check oil levels, replace as specified, and visually inspect shafts / bearings.
  • Inspect brake system: Regularly check brake pads, brake discs, and brake fluid.
  • Check coolant: According to the maintenance plan – OAT / HOAT coolants are often considered “long-life”, but inspection is still advisable.
  • General visual inspection & fasteners: Check screws, cables, cable connections, wheels, and tires for secure fit and wear.

 

Service Parts & Maintenance Kits from Hornig

At Hornig, you will find a specially tailored range of maintenance and wear parts for the R 1250 R:

  • Engine oil according to BMW specifications
  • Spark plugs & ignition system components
  • Oil filter, air filter & gaskets
  • Brake pads, brake discs & brake fluid
  • Final drive bearings / drive seals / lubricants
  • Batteries & electrical spare parts

With these components, you can efficiently and reliably perform annual inspections, the 20,000 km service, or intermediate maintenance.

 

Practical Maintenance Tips for Your BMW R 1250 R

  • Document all maintenance – a complete service booklet or digital records increase resale value.
  • Use community experience: Many R 1250 R riders use diagnostic tools such as MotoScan or GS911 to reset service warnings themselves.
  • Even with low mileage: Perform annual service – time-based maintenance is recommended by BMW for comfort and safety.
  • Regularly check the final drive oil and follow the replacement intervals specified, as aging can occur during long periods of inactivity or intensive use.
  • If you perform maintenance yourself, ensure correct torque values and BMW-specified operating fluids.

 

Implement Your Maintenance Plan Now & Order Parts from Hornig

Use the recommended maintenance intervals for your BMW R 1250 R and order the suitable replacement and service parts directly from Hornig. Whether oil & filter service, final drive maintenance, or diagnostic reset – with high-quality components and professional advice, you can carry out your customer service efficiently, safely, and reliably.

 

Note: This information serves as guidance. For exact maintenance plans, test values, or inspection scopes, please consult your BMW owner’s manual or a qualified professional workshop.