Important information
Regular maintenance is a must for a reliable and good motorcycle. Under normal driving conditions you can do the service a few hundred km sooner or later.
Subsequent you will find technical data as well as maintenance and service information.
We make no claim to completeness or accuracy of all data, these are only for your information.

Spares for your BMW R1300GS & BMW R1300GS Adventure


Technical data

Model BMW R1300GS
Volume (ccm) 1300
Cylinders 2
Power (HP) 145
Power (KW) 107
Weight (kg) 237
Seat height (mm) 850
Idle speed (R/Min) -
Injection Injection
Tyre pressure front (bar) 2,5
Tyre pressure rear (bar) 2,9
Spark plug 1 NGK LMAR8AI-10
Spark Plug 1 -
Standpipe -
Drive Cardan
Fork oil per rod -
Engine Oil Without Filter SAE 5W-40
Engine Oil With Filter 5,0 L API SL
Gearbox Oil -
Break Fluid DOT 4
Final Drive Oil SAE 70W-80
Fuel tank volume 19 L
Coolant water+


6.000 miles (10.000 km) service (30.000 km / 50.000 km):

Performing vehicle test with BMW Motorrad diagnostic system
Oil change, engine, with filter (annually, or every 10,000km)
Oil change, rear wheel drive (every 2 years or every 20,000km)
Visual inspection of the hydraulic clutch system
Visual inspection of the brake pipes, brake hoses and connections
Checking front brake pads and brake discs for wear
Checking brake-fluid level, front brakes
Checking rear brake discs and brake pads for wear
Checking brake-fluid level, rear brakes
Change front and rear brake fluid (first time after 1 year, then every 2 years)
Check flex element at the handlebar bridge
Checking coolant level
Checking tire pressures and tread depth
Checking ease of movement of side stand
Checking ease of movement of main stand
Checking spoke tension, adjusting if necessary
Check lighting and signaling system
Function test of engine start suppression
Final inspection and check of roadworthiness
Setting service-due date and service countdown distance
Checking battery charge state
Confirming BMW Service in on-board documentation

12.000 miles (20.000km) service (40.000 km / 60.000 km):

Performing vehicle test with BMW Motorrad diagnostic system
Oil change, engine, with filter (annually, or every 10,000km)
Checking valve clearance (every 20.000 km)
Replace all spark plugs (every 20.000 km)
Replace air filter cartridge (every 20,000 km)
Oil change, rear wheel drive (every 2 years or every 20,000km)
Visual inspection and lubrication of the cardan shaft (every 20,000 km)
Replace cardan shaft (every 80,000 km)
Visual inspection of the hydraulic clutch system
Visual inspection of the brake pipes, brake hoses and connections
Checking front brake pads and brake discs for wear
Checking brake-fluid level, front brakes
Checking rear brake discs and brake pads for wear
Checking brake-fluid level, rear brakes
Change front and rear brake fluid (first time after 1 year, then every 2 years)
Check flex element at the handlebar bridge
Checking coolant level
Checking tire pressures and tread depth
Checking spoke tension, adjusting if necessary
Checking ease of movement of side stand
Checking ease of movement of main stand
Check lighting and signaling system
Function test of engine start suppression
Final inspection and check of roadworthiness
Setting service-due date and service countdown distance
Checking battery charge state
Confirming BMW Service in on-board documentation

On this page, you'll learn which maintenance intervals and customer service services are performed during every inspection of your BMW R1300GS or R1300GS Adventure – from the 10,000km inspection up to 100,000km and beyond.

1. Odd Inspections (10,000km, 30,000km, 50,000km, etc.)

These standard inspections take place every 10,000km, as well as at 30,000km, 50,000km, 70,000km, 90,000km, etc. The following work is included:

  • BMW Motorcycle Diagnosis and Vehicle Test
  • Engine oil change with oil filter (annually or every 10,000 km)
  • Check coolant level, check brake fluid
  • Check brake pads and brake discs for wear
  • Visually inspect clutch, brake lines, and hoses
  • Check tire pressure and tread depth
  • Check side stand, center stand, and spoke tension
  • Check lights, indicators, and signaling systems
  • Check battery status, set service due date
  • Functional test of engine shutdown

2. Even inspections (20,000km, 40,000km, 60,000km, etc.)

At every 20,000km interval, as well as at 40,000km, 60,000km, 80,000km, and 100,000km, etc., the following additional work is required:

  • Check and adjust valve clearance
  • Replace spark plugs
  • Change air filter element
  • Inspect and lubricate the cardan drive (every 20,000km)

3. Additional Time-Interval Maintenance

Regardless of mileage, all machines should be serviced annually at the latest – or at least every 10,000 km. We also recommend changing the brake fluid after the first year and then every two years.

4. Why Regular Maintenance Is Worthwhile

  • Maximum safety and optimal vehicle reliability
  • The value of your BMW R1300GS & Adventure is maintained
  • Cost benefits through preventive maintenance
  • Compliance with BMW service standards & maintenance history

5. Conclusion

With our precisely coordinated maintenance intervals—10,000 km for routine work and 20,000 km for major services—you ensure the longevity, performance, and value retention of your BMW R1300GS or R1300GS Adventure. Rely on professional maintenance according to BMW standards and stay ready for action and mobile on your travels with the highest possible reliability.