-19% VAT for deliveries to NON EU countries! VAT will be deducted after entering the address!

Important information
Regular maintenance is a must for a reliable and good motorcycle. Under normal driving conditions you can do the service a few hundred km sooner or later.
Subsequent you will find technical data as well as maintenance and service information.
We make no claim to completeness or accuracy of all data, these are only for your information.

You can find all spare parts for your BMW G650Xchallenge, G650Xmoto & G650Xcountry here.


  BMW G650Xchallenge 2007-2010       BMW G650Xmoto 2007-2010       BMW G650Xcountry 2007-2010  
Technical Specifications:              
Capacity: 652 ccm 652 ccm 652 ccm
Cylinder: 1 1 1
HP/KW: 53/39 53/39 53/39
Weight (kg): 156 159 160
Seat height (mm): 930 920 840
Valve clearance (in):      
Valve clearance (out):      
Idle speed: 1480 R/MIN 1480 R/MIN 1480 ± 100 R/MIN
Injection: Injection 43 mm Injection 43 mm Injection
Tire pressure (front): 1,8 (1,9) bar 1,8 (1,9) bar 1,9 (2,0) bar
Tire pressure (rear): 2,0 (2,2) bar 2,0 (2,0) bar 2,1 (2,3) bar
Spark plug 1: NGK DR8EB NGK DR8EB NGK DR8EB
Spark plug 2: NGK DR8EIX NGK DR8EIX NGK DR8EIX
Standpipe Ø: USD-fork 45 mm USD-fork 45 mm USD-fork 45 mm
Drive: chain chain chain
       
Capacities:      
Fork oil per rod:      
Engine oil without filter: SAE 10W-40 SAE 15W-50 SAE 15W-50
Engine oil with filter: 2,3 litres 2,3 L min. API SJ 2,3 L min. API SJ
Transmission oil:      
Brake fluid: DOT 4 DOT 4 DOT 4
Final drive oil:      
Fuel: 9,5 litres 9,5 litres 9,5 litres
Coolant: water+ water+ water+



Running-in Check / 600 miles (1.000 km) service:

Performing vehicle test with BMW Motorrad diagnostic system
Changing engine oil (engine only) and oil filter element
Checking front and rear brake fluid level
Checking coolant level
Checking/adjusting clutch play
Checking freedom of movement of throttle cable and checking for kinks and chafing
Checking spoke tension, adjusting if necessary
Checking and lubricating chain drive
Checking tire pressures and tread depth
Checking specified torque of threaded fasteners with torque wrench: cylinder head / frame, bottom truss / frame, swinging-arm bearing stud (left and right)
Checking lights and signalling equipment
Function test, engine start suppression
Final inspection and check of roadworthiness
Confirming BMW Service in on-board documentation

6.000 miles (10.000 km) service (30.000 km / 50.000 km):

Performing vehicle test with BMW Motorrad diagnostic system
Changing engine oil (engine and oil tank) and oil filter element
Changing fluid in telescopic forks
Checking coolant level
Emptying drain hose from intake air silencer
Checking air filter
Checking valve clearance
Checking/adjusting clutch play
Checking freedom of movement of throttle cable and checking for kinks and chafing
Checking spoke tension, adjusting if necessary
Checking front and rear brake discs for wear
Checking front and rear brake pads for wear
Checking brake-fluid level, front and rear brakes
Visually inspecting brake pipes, brake hoses and connections
Change brake fluid in entire system
Checking and lubricating chain drive
Checking chain take-up rollers and slide rails
Check the steering-head bearing
Checking ease of movement of side stand
Checking tire pressures and tread depth
Checking specified torque of threaded fasteners with torque wrench: cylinder head / frame, bottom truss / frame, swinging-arm bearing stud (left and right)
Checking lights and signaling equipment
Function test, engine start suppression
Final inspection and check of roadworthiness
Checking battery charge state
Confirming BMW Service in on-board documentation

12.000 miles (20.000km) service (40.000 km / 60.000 km):

Performing vehicle test with BMW Motorrad diagnostic system
Changing engine oil (engine and oil tank) and oil filter element
Checking coolant level
Emptying drain hose from intake air silencer
Replacing air filter element
Checking valve clearance
Replacing spark plugs
Checking/adjusting clutch play
Checking freedom of movement of throttle cable and checking for kinks and chafing
Checking spoke tension, adjusting if necessary
Checking front and rear brake discs for wear
Checking front and rear brake pads for wear
Checking brake-fluid level, front and rear brakes
Visually inspecting brake pipes, brake hoses and connections
Change brake fluid in entire system
Checking and lubricating chain drive
Checking chain take-up rollers and slide rails
Check the steering-head bearing
Checking ease of movement of side stand
Checking tire pressures and tread depth
Checking specified torque of threaded fasteners with torque wrench: cylinder head / frame, bottom truss / frame, swinging-arm bearing stud (left and right)
Checking lights and signaling equipment
Function test, engine start suppression
Final inspection and check of roadworthiness
Checking battery charge state
Confirming BMW Service in on-board documentation

Comment:


Write a new comment