Important information
Regular maintenance is a must for a reliable and good motorcycle. Under normal driving conditions you can do the service a few hundred km sooner or later.
Subsequent you will find technical data as well as maintenance and service information.
We make no claim to completeness or accuracy of all data, these are only for your information.

You can find all spare parts for your BMW S1000R here.


  BMW S1000R 2014-      
Technical Specifications:              
Capacity: 999 ccm
Cylinder: 4
HP/KW: 160/118
Weight (kg): 207
Seat height (mm): 814
Valve clearance (in):  
Valve clearance (out):  
Idle speed: 1250 ▒ 50 R/MIN
Injection: Injection 48 mm
Tire pressure (front): 2,5 bar
Tire pressure (rear): 2,9 bar
Spark plug 1: NGK LMAR9D-J
Spark plug 2:  
Standpipe ě: USD-fork 46 mm
Drive: chain
       
Capacities:      
Fork oil per rod:  
Engine oil without filter: SAE 5W-40
Engine oil with filter: 3,5 litres  
Transmission oil:  
Brake fluid: DOT 4
Final drive oil:  
Fuel: 17,5 litres
Coolant: water+




Running-in Check / 600 miles (1.000 km) service:

Setting service-due date and service countdown distance
Deleting limit for running-in rpm
Performing vehicle test with BMW Motorrad diagnostic system
Oil change, engine, with filter
Readjusting steering-head bearing
Checking clutch cable and clutch-lever play
Checking front and rear brake fluid level
Checking fastener of clutch lever fitting
Lubricating clutch mechanism
Lubricating side stand
Checking coolant level
Checking chain sag
Checking tire pressures and tread depth
Checking lights and signaling equipment
Function test, engine start suppression
Final inspection and check of roadworthiness
Confirming BMW Service in on-board documentation

6.000 miles (10.000 km) service (30.000 km / 50.000 km):

Performing vehicle test with BMW Motorrad diagnostic system
Oil change in engine with filter
Checking valve clearance (every 30.000 km)
Checking valve timing (cylinder head cover removed, every 30.000 km)
Replace all spark plugs (every 30.000 km)
Replace air filter cartridge
Changing fluid in telescopic forks (every 30.000 km)
Visually inspect the brake pipes, brake hoses and connections
Checking front brake pads and brake discs for wear
Changing brake fluid, front and rear brakes
Checking rear brake pads and brake disc for wear
Checking steering-head bearing
Checking coolant level
Checking fastener of clutch lever fitting
Checking clutch cable and clutch-lever play
Lubricating clutch mechanism
Checking drive chain, sprocket and pinion
Checking tire pressures and tread depth
Checking ease of movement of side stand
Lubricate the side stand
Check the lights and signalling equipment
Function test, engine start suppression
Final inspection and check of roadworthiness
Setting service-due date and service countdown distance
Checking battery charge state
Installing front and rear seat
Confirming BMW Service in on-board documentation

12.000 miles (20.000km) service (40.000 km / 60.000 km):

Performing vehicle test with BMW Motorrad diagnostic system
Oil change in engine with filter
Checking valve clearance
Checking valve timing (cylinder head cover removed, every 30.000 km)
Replace all spark plugs
Replace air filter cartridge
Changing fluid in telescopic forks
Visually inspect the brake pipes, brake hoses and connections
Checking front brake pads and brake discs for wear
Checking rear brake pads and brake disc for wear
Changing brake fluid, front and rear brakes
Checking steering-head bearing
Checking coolant level
Checking fastener of clutch lever fitting
Checking clutch cable and clutch-lever play
Lubricating clutch mechanism
Checking drive chain, sprocket and pinion
Checking tire pressures and tread depth
Checking ease of movement of side stand
Lubricate the side stand
Check the lights and signalling equipment
Function test, engine start suppression
Final inspection and check of roadworthiness
Setting service-due date and service countdown distance
Checking battery charge state
Installing front and rear seat
Confirming BMW Service in on-board documentation